+1 829 698 0733 What Do You Need? Talk To Us
8am-4pm EST/NY Monday-Friday info@aareff.com

FM Antenna with Strong Magnetic Mount

Name: FM Antenna with Strong Magnetic Mount
Brand: Aareff
Price: 158.69 USD
Availability: InStock

FM Antenna with Strong Magnetic Mount Main Image

5 YEARS
LIMITED WARRANTY MORE INFORMATION

Features

• 87 to 108MHz Operation
• 300W Maximum Power Handling
• Works with 250W 12V DC Transmitter
• Works with 100W 12V DC Transmitter
• Between +1 to +2dBi Gain
• Very Strong 13cm Dia. Magnet
• 130 km/h (80 mph) Wind Handling
• SWR 1.5 With Eight Interchangeable Rods
• Available with PL259 or Male N type
• Strong 5mm Dia. Stainless Steel Rods
• Magnet Enclosed With Rubber Boot
• 5mt of RG58 A/U Cable

300W Power Handling & RF Safety

Because this antenna uses a direct connection to the stainless steel radiating rod—with zero tuning coils or capacitors to burn out—it can reliably handle up to 300W. The only limiting factor for power is the RG58 A/U cable itself.

✓ Pure Power Transfer:
No delicate internal tuning components means maximum durability and efficiency under high-power loads.

✓ High-Power Deployment Protocol:
When pushing maximum power (such as with our 250W transmitter), RF safety is critical. Mount the antenna on a tall commercial vehicle or ensure a strict 30-meter exclusion zone to protect the public from RF exposure.

Need help planning a safe, high-power temporary setup? Tap the WhatsApp button to chat directly with our technical team for deployment advice.

FM Antenna with Strong Magnetic Mount View From Front

Intended Use & Deployment

Tested and proven in the field—from high-speed mobile live commentary in the UAE to temporary setups for regional stations—this magnetic mount antenna provides immediate broadcasting capabilities when you need them most.

Rapid Emergency Deployment: Crucial for disaster mitigation or maintaining broadcast continuity when a main tower is offline. Simply place the heavy-duty magnetic base on the center of a vehicle roof, connect any Aareff transmitter (100mW to 250W), and instantly restore your broadcast from the highest available elevation.

FM Antenna with Strong Magnetic Mount View From Back

Verified Horizon Gain (+1dBi to +2dBi)

While the true gain of portable 1/4 wave antennas can be notoriously hard to measure, our advanced RF modeling and real-world field tests confirm a reliable +1dBi to +2dBi directed at the horizon.

✓ Optimized for Listeners:
We focus your signal outward along the ground, rather than wasting energy on upward-pointing sky lobes.

✓ Transparent Data:
See the first image for the complete radiation pattern and performance specs.

Do You Have A Question?

USER MANUAL

Simplicity

The antenna comes in: The magnetic base and 5 meters of cable with the PL259/N male connector are all one piece, and then there are eight tuning rods. The long one covers the frequency range of 87 to 98 MHz, and the short one covers the frequency range of 98 to 108 MHz. We label them accordingly so you can't mix them up.

8 tuning rods

Installation

This is the easy part. Just put the 13cm dia. magnetic base in the middle of the the vehicle roof. Pick the stainless steel rod for your frequency. The silver coloured part on the magnetic base has a little screw on the side. Using a small electrical screwdriver loosen the screw, then drop the frequency rod you have picked into the hole, make sure it goes right to the bottom. Then tighten up the small screw which will secure the rod in place.

FM Antenna with Strong Magnetic Mount View From Above

SWR and Reflected Power

With eight separate stainless steel rods we are able to cover the entire band form 88 to 108 with an SWR of 1.5 or less. It's important that magnetic base is put in the centre of the vehicle roof and not at one side. In the centre it approximates close to 1/4 wave ground plane. It will work if it is off to one side of the roof, but there will be a slight rise in SWR and reflected power.

ROHS

All components used in this apparatus are RoHS compliant and do not contain above the specified limits in any of the following restricted substances:

Lead
Hexavalent Chromium
Mercury
Cadmium
Polybrominated Biphenyls (PBB's)
Polybrominated Diphenylethers (PBDE's)

PRODUCT END OF LIFE

This apparatus must NOT be disposed of with other domestic waste.

We are fully committed to maintaining our responsibilities to the environment. Owners of apparatus that has reached the end of it's useful life can return it to us for recycling, recondition, reuse or proper disposal. You will be required to pay lowest cost postal service available to ship the apparatus to us. Before shipping please contact us for more important information.

ALL RIGHTS RESERVED. Aareff is a trademark of Aareff Transmission Systems. All contents of this document including, but not limited to the images, logos, text, illustrations are protected by copyrights, trademarks and other intellectual property rights which are owned and controlled by Aareff Transmission Systems or by other parties that have licensed their material to Aareff Transmission Systems. This document in part or whole may not be copied, reproduced, republished, uploaded, posted or distributed in any way, including by e-mail, ftp or any other electronic means

Every care has been taken in the preparation of this document, errors in content, typographical or otherwise, may have occurred. If you have comments concerning its accuracy, please contact Aareff Systems Limited (UK)

Support from an Engineer 0.0111360549927