+1 829 698 0733
What Do You Need? Talk To Us8am-4pm EST/NY Monday-Friday info@aareff.com
10kW EIRP Complete FM Broadcasting Package
How Far Will 10kW Reach?
10000W EIRP is a formidable power level, this is just over 6kW ERP which is the power level required by the FCC for a class B1 and C3 stations. You can calculate EIRP and ERP along with antenna gain online here. According to our customer reports distances of up to 138km have been achieved in some directions using 10kW EIRP. In reality on average terrain with average quality radio receivers the normal usable distance would be about half this. For more accurate distance predictions we can make you a radiation plot using satellite elevation data like these
1kW FM Stereo Transmitter
The crisp clear FM signal starts in this unit which provides 1000W super clean output in stereo with audio processing and limiting. For a small, but with a need to be quite powerful radio service, a big town for example, this transmitter is just the ticket with everything required included. More info on the 1000W Transmitter
Eight Antennas, 12dBi of Gain
The 100KW, 50kW, 25kW, 12.5kW and 10kW all use this same 8 way folded dipole broadband antenna. The simple reason is, because it's simply amazing. It has high bandwidth with an SWR or less then 1.2 from 87.5 to 108 MHz, most dummy test loads struggle to manage this. Many coaxial cable lengths, especially the cheap Chinese rubbish struggles to maintains less than 1.2. So this is the reason this antenna is gold, metaphorically speaking, made out of aluminum and stainless steel. I forget to mention, it does not rot or corrode even in coastal areas. But most important, it MAGNIFIES the signal radiating to the horizon by over 15 times !!!
Includes RDS
RDS is now included on all stereo transmitters with audio processing. RDS shows your station name and more scrolling across the car radio display.
This RDS is not just ordinary RDS, it is fully programmable dynamic RDS. This means the transmitter can be connected to a PC by a USB cable. The transmitters RDS circuit can be programmed to pick the Artist and Song name from any folder on the PC disk drive. This folder is easy to set up in the DJ playout software, like Zara Studio etc.
-500.webp)
Do You Have A Question?
PACKAGE CHECKLIST
| Qty | Description | Item |
| 1 | FM Stereo Driver with Audio Processing |  |
| 1 | 1000W FM Power Amplifier |  |
| 1 | LMR400/600 40m /131ft Cables |  |
| 1 | All Other Connecting Cables |  |
| 8 | Broadband High Power Folded Dipole Antenna with Tower Mounting Clamps and RF Splitters |  |
|
LIMITED WARRANTY |
40 Metre (130 Feet) Antenna Cable
The 40mt of LMR600 cable supplied with this system is robust yet flexible making installation much easier. If you prefer the more rigid type, that's okay, just let us know and we will change the system to that. LMR600 has a very high specification with just over a fraction of 1dB loss for 40mt at 100MHz. In addition, if 40mt is not sufficient in length, just let us know and for a small additional cost we will quote for the extra length.
10kW Maximum Range Chart
This graph is based on average customer reports in some directions. Basically this shows the typical ranges really ever recorded. Most of the reports were radio station listeners that phoned, texted, WhatsApp etc. into the radio station programs operated by our customers. Range is very difficult to predict as there are many factors that effect it. More info on FM Transmission Range
FM Stereo Audio and Processing
The FM signal starts in the internal Veronica PLL which produces the super low noise and highly stable FM signal. You can find more info on this at in our 1W Exciter (PLL driver). Then the internal stereo coder and audio processor boards provide a loud and crisp audio signal on the listeners radio. If your more of an expert, you can if you want use an external processor such as Orban, Inovonics or PC generated MPX/RDS, the limiter and stereo coder we supply can be completely disabled.
DECLARATION OF CONFORMITY
European Union
We hereby declare that this equipment complies with;
• ETS 300384 European Telecommunications Harmonised Standard when used with an audio compressor limiter supplied and tested by Aareff
• EN 301489-11 V1.3.1 (2006-05) EMC Electromagnetic Compatibility when used with 1 meter AC mains cord supplied. If the installation engineer needs to extend this cord, this and the audio input cable should be no more than 3 meters in length to remain in compliance with EMC directive.
• 2006/95/EC Directive (2006-12) LVD Low Voltage Directive.
Equipment compliance is possible using equipment from and in conjunction from other manufacturers, but since this is beyond the control of Aareff Systems, Aareff Systems cannot or be expected to guarantee compliance in this situation.
United States
The following list are the FCC technical requirements for FM broadcasting. We confirm and verify that this transmitter complies with the technical requirements.
47 CFR Chapter I Federal Communications Commission sections:
• 73.1560, 2.1046 RF Power
• 73.1545, 2.1055 Frequency Stability
• 73.317, 2.1049 (e)(3) Emission Limitation, Emission Mask
• 73.317, 2.1057, 2.1051 Emission Limits, Spurious Emissions at Antenna Terminal
• 73.317, 2.1057, 2.1053 Emission Limits, Field Strength of Spurious Emissions
