500mW ERP FM SYSTEM WITH TUNED DIPOLE AND 10M CABLE
PROFESSIONAL RANGE
This neat package, which INCLUDES our tuned dipole antenna with 10 metres of cable was primarily designed for use for low power broadcasting in New Zealand. However it is suitable for any low power broadcasters wishing to cover a small complex such as a university complex, hospital grounds, very small village, theme parks etc.
Any frequency between 87.5 to 108MHz can be accurately programmed on the internal dip switches accessible from the underside panel in a few minutes. Expensive test equipment is NOT required, set up is a simple task using the LED's on the front panel. The transmitter operates from a 13.8V DC supply or the supplied AC adapter (100 - 250VAC). This makes it suitable for use on a standard power pack or automobile power system anywhere around the world.
On delivery the equipment is ready to plug in and use. This transmitter along with all our other products comes with a 2 year warranty and our reputation of high reliability.
13.8VDC or 115/230 VAC 50/60 Hz
RF Output 500mW ERP +/- 0.5 dB
0dB Gain using Dipole with 10m RG58 Cable
RF Output Connector BNC
RF Harmonics >75dB rtc
RF Spurious >63dB rtc
Out of Lock Suppression >63dB rtc
Freq 100KHz steps from 87.5 to 108MHz
Stability Extreme +/- 2 KHz from -20 to +40 Deg C
Stability Normal +/- 300 Hz at 20 Deg C
Fine Freq. Adj.> +/- 1000Hz
Freq Adj. Accuracy+/- 50 Hz
Deviation Sensitivity Stability +/-2% max
Audio In Phono/RCA type unbalanced sockets
Pre-emph (50uS/ 75uS/ None) Selectable
Audio Level 0.775 V rms for +/- 75 KHz
Signal to Noise Ratio 80 dBu
Audio Freq Stereo +/- 0.5dB 30Hz to 15 KHz
Audio Distortion Better than 0.02 % THD
Stereo Crosstalk better than 35dB
Stereo Pilot Tone 19KHz
Pilot Tone Stability 0.2Hz Geolocation by geoPlugin