WhatsApp Logo +1 829 698 0733 What Do You Need? Talk To Us
8am-4pm EST/NY Monday-Friday info@aareff.com Language Flag

2.5kW EIRP Complete FM Broadcasting Package



2500W EIRP 19 inch professional equipment rack with FM transmitter and RF amplifier - Stock Code: 2500w58a20
2500W EIRP antenna system, operation and installation guide

How Far Will 2.5kW Reach?

This type of power and antenna should be mounted on a least a two story building and on top of a 12ft / 3.5mt pole. If this condition is met and the building is on high ground, then up to 85km is possible with high quality radio receivers, Expect about half this range with lower quality radio receivers. More on FM TRANSMISSION RANGE

1kW FM Stereo Transmitter

This bold looking 19 inch unit is made to last. Constructed from steel and power coated in black, it's here to stay. The internal boards and modules are no exception. Driven by the world renowned Veronica® PLL board to give super low noise and RF stable performance. The limiter and stereo coder can be completely disabled if you want to use an external processor such as Orban, Inovonics or PC generated MPX/RDS. More info on the 1000W Transmitter

RDS Option

If you want to see your station name and more scrolling across the car radio display add the RDS Option, 'Add To Cart' rds-upgrade in the price panel.

This RDS Option is not just ordinary RDS, it is fully programmable dynamic RDS. This means the transmitter can be connected to a PC by a USB cable. The transmitters RDS circuit will pick the Artist and Song name from any folder on the PC disk drive. This folder is easy to set up in the DJ playout software, like Zara Studio etc. Detailed information HERE.

1kW Professional FM Radio Transmitter Stereo Audio and Processing

Inc. Delivery to UNITED STATES

2.5kW EIRP 20M OF CABLE FM STEREO WITH AUDIO PROCESSING (2500w58a20)
US$ 3639

Do You Have A Question?

Email Address

Phone Number

Package Contents

QtyDescriptionItem
1FM Stereo Driver with Audio Processing
11000W FM Power Amplifier
1LMR400 20m / 66ft Cable
15/8 Wave 2KW Vertical High Gain FM Broadcasting Antenna

5 Years! Warranty
5 YEARS
LIMITED WARRANTY
MORE INFORMATION

4.8dBi Antenna Gain

The 5/8 antenna is a high performance narrow band vertical antenna which is designed to being mounted to the top of a pole. Because of this top pole mounting it's physically higher off the ground than side mounted dipoles etc. Due to this, even if it's lower gain than the side mounted type, it can have increased range, just because of the height advantage.

20 Metre (66 Feet) Antenna Cable

This package uses 66ft / 20mt of LMR400 antenna cable. The loss on this cable and plus the antenna gain actually results in an EIRP of over 2500 watts.


Maximum FM Transmitter Range For 2500W EIRP Based On Customer Reports From Around The World

2.5kW Maximum Range Chart

This graph is based on average customer reports in some directions. Basically this shows the typical ranges really ever recorded. Most of the reports were radio station listeners that phoned, texted, WhatsApp etc. into the radio station programs operated by our customers. Range is very difficult to predict as there are many factors that effect it. More info on FM Transmission Range

FM Stereo Audio and Processing

The FM signal starts in the internal Veronica PLL which produces the super low noise and highly stable FM signal. You can find more info on this at in our 1W Exciter (PLL driver). Then the internal stereo coder and audio processor boards provide a loud and crisp audio signal on the listeners radio. If your more of an expert, you can if you want use an external processor such as Orban, Inovonics or PC generated MPX/RDS, the limiter and stereo coder we supply can be completely disabled.

Declaration of Conformity

European Union

We hereby declare that this equipment complies with;
• ETS 300384 European Telecommunications Harmonised Standard when used with an audio compressor limiter supplied and tested by Aareff
• EN 301489-11 V1.3.1 (2006-05) EMC Electromagnetic Compatibility when used with 1 meter AC mains cord supplied. If the installation engineer needs to extend this cord, this and the audio input cable should be no more than 3 meters in length to remain in compliance with EMC directive.
• 2006/95/EC Directive (2006-12) LVD Low Voltage Directive.

Equipment compliance is possible using equipment from and in conjunction from other manufacturers, but since this is beyond the control of Aareff Systems, Aareff Systems cannot or be expected to guarantee compliance in this situation.

United States

The following list are the FCC technical requirements for FM broadcasting. We confirm and verify that this transmitter complies with the technical requirements.

47 CFR Chapter I Federal Communications Commission sections:
• 73.1560, 2.1046 RF Power
• 73.1545, 2.1055 Frequency Stability
• 73.317, 2.1049 (e)(3) Emission Limitation, Emission Mask
• 73.317, 2.1057, 2.1051 Emission Limits, Spurious Emissions at Antenna Terminal
• 73.317, 2.1057, 2.1053 Emission Limits, Field Strength of Spurious Emissions






CUSTOMERS
ABOUT
CONTACT
TECH
TERMS

©2023 Aareff Systems

0.0212969779968